Micro Spot V2 ORDERCODE 41370
8 Backside Fig. 2 2 3 4 5 2) IEC Connector + Fuse 1A/250V 3) DMX signal c
9 Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure t
10 DMX Protocol 5 Channel Mode Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adj
11 13 Channel Mode Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from
12 Channel 12 – Auto Program 0-7 No Function 8-22 Auto Program 1 23-37 Auto Program 2 38-52 Auto Program 3 53-67 Auto Program 4 68-82 Auto Program 5
13 The Micro Spot can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel When the indicator
14 Functions control panel MODE 1: as default mode. Receive DMX512 signal, set the desired address via the UP/DOWN buttons. DMX mode: select c
15 MODE 7: Select the scan angle for PAN. (just for Master/Slave and sound control) Press the MODE/ESC button until the display shows / / . Sele
16 Static gobo-wheel This static gobo-wheel has 9 gobos and open. Shutter/Dimmer/Strobe The dimming (0-100%) is provided by a simple mechanical shut
17 Gobowheel Static Fig. 5 Maintenance The operator has to make sure that safety-relating and machine-technical installa
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Micro Spot brings excitement to any venue. Whether you want sim
18 Replacing a Fuse Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse burns out, the pro
19 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture · Ch
20 Product Specification Model: Showtec Micro Spot Voltage: 240V-50Hz (CE) Power: 50W Fuse: 1A / 250V Dimensions: 175x175x225mm (LxWxH) Weight: 3,74
1 2 2 3 4 6 6 7 7 8 9 9 9 10 10 11 13 13 13 14 16 16 16 17 17 18 18 18 18 20 Showtec Showtec Micro Spot™ Product Guide Warning...
2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that
3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod
4 OPERATING DETERMINATIONS • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will s
5 Mounting a clamp to the underside of the Micro Spot Improper installation can cause serious damage to people and property
6 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly
7 Description of the device Features The Showtec Micro Spot is a moving-head with high output and great effects. • Gobo wheel with 9 gobo’s and rain
Kommentare zu diesen Handbüchern